Commercial Vehicle Body Builder
Luton Van Bodies - Commercial Vehicles
This gallery shows Luton Van Bodies built by BL Searle Ltd. You can click on a commercial vehicle body to get a larger picture.
3.5 Tonne Luton Van Body with GRP body panels, rear roller shutter and 500kg tail lift.
3.5 Tonne Luton Van Body. Vetrolite body panels with alloy top hats bonded to inner face to carry tie rails and load lock. Anodised body extrusions. Alloy under subframe. Galvanised rear frame with dry freight door. Hinge front Luton panel and floor to allow cab to tilt.
3.5 Tonne Luton Van for Double Glazing Company. 4mm Vetrolite body panels. Anodised alloy body extrusions. Alloy subframe and galvanised rear frame with flush fit doors. Internal frail frames. Pull out side frame to o/s with 2 rows of stainless steel lock and load tracks and 4 rows of rubber fender. Hinged luton front and floor to allow cab to tilt.
3.5 Tonne Aero Luton Van Body with Vetrolite body panels. Alloy subframe, anodised alloy body extrusions, galvanised steel rear frame. Cantilever tail lift with hinged top flap.
3.5 Tonne Vetrolite Luton. Alloy subframe, rear frame. Double flap to Luton to allow longer lengths to be carried. Rear step bar.
3.5 Tonne Vetrolite Luton Body
3.5 Tonne Luton with Vetrolite Body Panels. Alloy subframe, body extrusions, rear frame and roller shutter. Internal frail frames.
3.5 Tonne Aero Luton with Vetrolite Body Panels. Annodised body extrusions, alloy subframe, galvanised rear frame with alloy roller shutter. Full ply lining. 2 rows of lock load track and 500kg tail lift.
3.5T Aero Luton. Vetrolite body panels. Anodised alloy body extrusions. Galvanised steel and rear frames with alloy roller shutters. Full ply lining with 2 rolls of load lock track. 500kg tail lift.
3.5 Tonne All Annodised Alloy Luton Body. Vertical interlocking body panels so sections can be replaced if damaged. Panels very strong and do not drum when vehicle is moving. Body is 99.9% recyclable after life.
3.5 Tonne Vetrolite Luton Body with Tail Lift