Commercial Vehicle Body Builder
Curtain Side Bodies - Commercial Vehicles
This gallery shows Curtain Sided Vehicle Bodies built by BL Searle Ltd. You can click on a commercial vehicle body to get a larger picture.
3.5 Tonne Curtain Side
4900mm OAL x 2300mm OAW x 2400mm Floor to Pelmit.
All Alloy Framework, 18mm phenolic mesh floor. Flush fit rear barn doors. Chassis extension plus rear light bar.
3.5 Tonne Curtain Side Van Body with alloy sub frame. 3mm Galvanised steel pillars. Radiused anodised alloy cant rails and front pillar cappings. Phenolic mesh board floor. Flush fit barn doors. 4 pairs floor lashing rings.
3.5 Tonne Curtain Side Van Body.
3.5 Tonne Curtain Side Van Body
Half curtainside body with removable sidebar for load poles. 500kg tail lift with anti-slip coating to platform.
3.5 Tonne half curtain side luton. Vetrolite body panels. Curtain to O/S. Removable side bars and posts.
3.5 Tonne Aero Curtainside Luton. 500kg tail lift with 1145mm platform and roll stops.
7.5 Tonne Curtainsided Truck with alloy subframe. 4mm galvanised steel pillars. Alloy main sides. Radiused anodised alloy cant rails and front pillar cappings. Dry freight rear door, phenolic mesh board floor. Floor lashings rings.
7.5 Tonne Curtainsides Truck with fixed back.
7.5 Tonne Curtainsided Truck with Galvanised runners. Alloy bearers. 4mm galve pillars, radiused annodised alloy cant rails and front pillars cappings. Alloy main sides. Flush fit barn door. One piece polyfont floor. Floor lashings rings.
11 Tonne Curtainsided Truck with Hardwood Floor
Curtainside with cantilever tail lift. Removable side posts/rails and spring loaded poles for transporting Dutch trolleys.
Brewery Dray with Slide Curtains. Removable side bars and posts. Dry freight rear door.
18 Tonne Curtainsided Truck with tuck away tail lift.
18 Tonne Curtainsided Truck with galve runners. Alloy bearers. 4mm galve pillars. Radiused anodised alloy cant rails and front pillar cappings. One piece polyfont floor. Alloy sides. Tuck away tail lift. Floor lashing rings.
4570mm OAL x 2140mm OAW x 2140mm floor to pelmet. Alloy rear chassis ext and light bar. Alloy subframe, curtain pillars, cant rails, side raves, rear header. 18mm phenolic mesh floors. Flush fit barn doors. 4 pairs of recessed floor rings. 3D cab deflector.
Luton body converted to half curtain side. Tail lift removed. Galvanised steel curtain pillars, cant rail and side rave.
Ingimex Luton Body converted to half curtainside.