Commercial Vehicle Body Builder
Box Van Bodies - Commercial Vehicles
This gallery shows Box Van Bodies & Box Truck Bodies built by BL Searle Ltd. You can click on a commercial vehicle body to get a larger picture.
3.5 Tonne Box Van Body with alloy subframe. Anodised alloy body extrusions. Galvanised rear frame. Vetrolite body panels. Dry freight door.
3.5 Tonne box van body with alloy subframe. Anodised alloy body extrusions. Galvanised rear frame. Vetrolite body panels. Alloy roller shutter. 500kg tail lift.
3.5 Tonne box van body with alloy subframe. Anodised alloy body extrusions and rear frame. Vetrolite body panels. 750kg cantilever tail lift. Hinged top flap to form remainder of rear closure.
All alloy van box body. Anodised body extrusions. Vertical plank panels. 750kg cantilever tail lift. Hinged top flap to form remainder of rear closure.
3.5 tonne box van with cantilever tail lift
6.0 tonne truck box body with Galve subframe and rear frame. Anodised alloy body extrusions. GRP panels. Flush fit barn doors.
7.5 tonne GRP box. Alloy sub frame. Anodised body extrusions and cantilever tail lift. 2400mm rear aperture height.
7.5 tonne box truck body with Galve subframe and rear frame. Anodised alloy body extrusions. GRP panels. Flush fit barn doors.
7.5 tonne GRP truck box body with 1000kg Tail Lift
7.5 tonne GRP box truck body with side shutter & side lift. Dry freight rear door. 1000kg Tail Lift. Polyfont one piece floor. Load lock rails. Moveable centre divider. Floor rings
GRP body side roller shutter. Dry freight rear door. 24mm phenolic floor. Anodised body extrusions. Galvanised rear frame. Tuck away side lift with safety bars. 1000kg tail lift to rear with hinged ramps. Movable centre divider. Floor rings.
Box Truck with 4 sliding doors to near side. Vehicle body with fixed offside body panel. Stainless steel rear frame with dry freight door. Tuck away tail lift.
17mm GRP Box Van with Cantilever Tail Lift.
8200mm GRP box. Tuck away tail lift. Flush fit doors. Four rows of load lock track. Floor lashing rings.
8540mm OAL x 2540mm OAW x 2550mm rear aperture height GRP box body. Alloy bearers at 300mm centres. 24mm phenolic mesh floor. Cantilever tail lift 2000kg, 2680mm alloy platform. Load lock track. Rubber internal rails. Removable alloy centre deck x 4 600m OAW sections with removable end bars and spring loaded load poles.